LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Removal

Rear Crankshaft Oil Seal: Removal

Remove transaxle. On M/T models, remove clutch and pressure plate. On all models, remove flywheel or flexplate. Remove seal housing and gasket. See Figure. Remove seal from housing. Note direction of seal installation.

NOTE: If necessary, remove rear engine plate to remove seal housing.
scientia non olet · About LEMON Manuals