LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Oil Pan >> Installation

Oil Pan: Installation

  1. To install, reverse removal procedure. Before installing, apply a bead of silicone to inside of bolt holes on both sides of stiffener.
  2. Install pick-up tube with new gasket. Tighten all bolts to specification. See TORQUE SPECIFICATIONS  table at end of article. Fill crankcase with oil.
scientia non olet · About LEMON Manuals