LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Overhaul >> Rocker Arm Shaft Assembly

Rocker Arm Shaft Assembly

  1. Mark component location for reassembly reference. Disassemble rocker arm assemblies. DO NOT remove valve lash adjuster unless necessary.
  2. Inspect components for damage. Measure rocker arm I.D. and rocker arm shaft O.D. Determine oil clearance. Maximum oil clearance is .004" (.10 mm). Replace components if necessary. Inspect valve lash adjusters for damage. Remove lash adjusters only if they are damaged.
  3. Coat components with engine oil. Install valve lash adjuster, if removed, and use new "O" ring. Install components in original location. Different type of stepped ends are used on rear of rocker arm shafts. See Figure.
scientia non olet · About LEMON Manuals