Pistons, Pins & Rings Specifications
PISTONS PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Pistons | |||||
| Clearance | .0014-.0030 (.036-.076) | ||||
| Diameter | 3.3836-3.3844 (85.943-85.964) | ||||
| Pins | |||||
| Diameter | .8651-.8654 (21.974-21.981) | ||||
| Piston Fit | .0003-.0009 (.008-.023) | ||||
| Rod Fit | Interference Fit Of .0005-.0015 (.013-.038) | ||||
| Rings | |||||
| No. 1 | |||||
| End Gap | .008-.014 (.20-.36) | ||||
| Side Clearance | .001-.003 (.03-.08) | ||||
| No. 2 | |||||
| End Gap | .006-.012 (.15-.30) | ||||
| Side Clearance | .001-.003 (.03-.08) | ||||
| No. 3 (Oil) | |||||
| End Gap | |||||
| Turbo | |||||
| Standard | .008-.028 (.20-.71) | ||||
| Wear Limit | .039 (.99) | ||||
| Non-Turbo | |||||
| Standard | .012-.035 (.30-.89) | ||||
| Wear Limit | .039 (.99) | ||||