LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft >> Adjustments >> Ride Height

Ride Height

Measure distance between points specified in RIDE HEIGHT MEASUREMENT LOCATIONS  table. This distance is ride height.

RIDE HEIGHT MEASUREMENT LOCATIONS

Model Measurement Location
Aerostar Top Of Rear Axle Tube And Bottom Of Frame Rail
Bronco Top Of Front Axle Tube And Bottom Of Spring Tower, Measured AT Center Face Of Jounce Bumper
Explorer Top Of Rear Axle Tube And Bottom Of Jounce Bumper
Pickup
2WD Top Of Front Axle And Bottom Of Spring Tower, Measured At Center Face Of Jounce Bumper
F250 4WD Top Of Front Axle Tube And Bottom Of Frame
F350 4WD Top Of Front Spring Spacer Plate And Bottom Of Bottom Of Jounce Stop Metal
F350 Super Duty Top Of Front Spring Plate At Center Of Spring And Bottom Of Frame
Ranger Top Of Rear Axle Tube And Bottom Of Jounce Bumper
Van Top Of "A" Frame To Bottom Of Spring Tower