Drive Pinion Bearing Race Installation
- Place pinion inner and outer bearing races into bores of carrier. Place inner race installer on inner bearing race. See Fig 1 . See PINION BEARING RACE INSTALLER & FORCING SCREW table.
- Place outer race installer on outer bearing race. Install forcing screw through bearings. Tighten screw until both bearing races are seated in carrier bore.PINION BEARING RACE INSTALLER & FORCING SCREW
Application Tool Number Forcing Screw T75T-1176-A Pinion Bearing Race Installer Inner Bearing Race Dana 35 T60K-4616-A Dana 44 T80T-4000-D Dana 50 T80T-4000-F Outer Bearing Race Dana 35 T71P-4616-A Dana 44 & 50 T80T-4000-E