LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Removal & Installation >> Rear Stabilizer Bar >> Removal & Installation (Explorer)

Removal & Installation (Explorer)

  1. Remove the nuts, bolts and washers and disconnect the stabilizer from the links. See Fig 1 .
  2. Remove the bolts from the stabilizer bar axle retainers. Remove the retainers and stabilizer bar.
  3. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Installing Rear Stabilizer Bar (Explorer)
G00112843Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals