LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front (2WD) >> Axle Pivot Bushing R & I >> Removal

Axle Pivot Bushing R & I: Removal

  1. Remove coil spring. See COIL SPRING R & I. If left axle bushing is to be replaced, remove axle pivot bolt. Pull pivot end of axle downward until bushing is exposed.
  2. If pivot bushing in right axle is to be removed, axle must be removed to gain access to pivot bushing. Remove axle. See AXLE R & I.
  3. Install Forcing Screw (T78P-5638-A1), Bushing Remover (T80T-5638-A2) and Receiver Cup (T78P-5638-A3) onto pivot bushing. Turn forcing screw and remove pivot bushing. See Fig 1.
Fig 1: Replacing Axle Pivot Bushing
G90C15497Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals