LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> A/C Compressor Overhaul >> NIPPONDENSO 6C-17 6-Cylinder >> Shaft Seal >> Removal

Shaft Seal: Removal

  1. Discharge A/C system using approved refrigerant recovery/recycling equipment, and remove compressor. Drain oil from compressor, and measure the amount of oil drained. Remove compressor clutch assembly.
  2. Remove compressor crankshaft key. Remove felt packing from nose of front cover. Clean area around seal.
  3. Remove seal retaining snap ring. Using Seal Remover/Installer (6429), remove seal from compressor.
scientia non olet · About LEMON Manuals