LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4.0L V6 - VIN [X] >> Removal & Installation >> Intake Manifolds >> Removal (Upper)

Removal (Upper)

  1. Remove negative battery cable. Remove air cleaner intake duct from throttle body. Remove snow/ice shield to expose throttle linkage. Remove throttle cable and bracket from throttle body.
  2. Disconnect all vacuum hoses. Disconnect all electrical connectors. Relieve fuel pressure. See FUEL PRESSURE RELEASE . Using Fuel Line Coupling Key (T90P-9550-A), disconnect fuel supply and return lines at fuel supply manifold. See Figure. Remove ignition coil. Remove upper intake manifold bolts. Remove upper intake manifold and throttle body as an assembly.
scientia non olet · About LEMON Manuals