LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4.0L V6 - VIN [X] >> Removal & Installation >> Cylinder Head >> Inspection

Cylinder Head: Inspection

Check dowels in cylinder block and replace if necessary. Check cylinder head warpage. Resurface cylinder head if warpage exceeds specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. DO NOT  machine more than .010" (.25 mm) from original cylinder head surface.

CAUTION: Always use NEW cylinder head bolts when installing cylinder heads.
scientia non olet · About LEMON Manuals