LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel >> Removal (Models With Air Bag)

Removal (Models With Air Bag)

  1. Position front wheels straight ahead. Disconnect negative battery cable and back-up power supply. Remove air bag module retaining nuts. Unplug wire harness from air bag module. Remove air bag module.
  2. Disconnect speed control wiring (if equipped). Mark steering wheel and shaft for installation reference. Remove and discard steering wheel bolt. Using Steering Wheel Puller (T67L-3600-A), remove steering wheel. Route contact assembly wiring through steering wheel as it is removed.
scientia non olet · About LEMON Manuals