LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel >> Removal & Installation (Models Without Air Bag)

Removal & Installation (Models Without Air Bag)

  1. Disconnect negative battery cable. Position front wheels straight ahead. On pickup and van, unsnap horn cover by grasping sides and pulling away from column. On Explorer and Ranger, remove retaining bolts and steering wheel pad. Disconnect wiring. Mark steering wheel and shaft for installation reference. Remove steering wheel bolt.
  2. Using Steering Wheel Puller (T67L-3600-A), remove steering wheel. To install, reverse removal procedure. Align reference marks. Install retaining nut. See TORQUE SPECIFICATIONS table.
scientia non olet · About LEMON Manuals