LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing >> Fuel Level Gauge >> Calibration Test (Without Tester)

Calibration Test (Without Tester)

  1. Use a DVOM to check gauge calibration. With sending unit float arm in empty stop position, resistance should be 15 ohms. With sending unit float arm in full stop position, resistance should be 160 ohms.
  2. Fuel gauge should begin to read empty at 22.5 ohms and full at 145 ohms.
scientia non olet · About LEMON Manuals