LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - AOD >> Component Disassembly & Reassembly >> Governor Assembly >> Reassembly

Governor Assembly: Reassembly

  1. If removed, install clip and spring on valve. Install valve into governor body. Install sleeve in body with points outward.
  2. Install plug in sleeve with knurled face inward. Install cover. Install screen in body with steel band (brass colored) inward and tip of screen facing outward.
  3. Position governor body on counterweight and install retaining screws. Tighten screws to specification. See TORQUE SPECIFICATIONS  . When correctly assembled, finished face of governor body should be flush with face of counterweight.
Fig 1: Exploded View of Governor Assembly
G92A14613Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals