LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - AOD >> Component Disassembly & Reassembly >> Forward Clutch >> Disassembly

Forward Clutch: Disassembly

  1. Lift clutch hub and No. 3 needle bearing from forward clutch assembly. Using a screwdriver, pry clutch pack selective retaining snap ring from drum. Remove clutch pack. See Figure .
  2. Using Compressor Tool (T65L-77515-A), compress piston return spring and remove retaining snap ring. Lift out retainer and return spring.
  3. Remove clutch piston from drum. Note position of inner and outer piston seals, then remove seals. Ensure check balls in piston are free.
scientia non olet · About LEMON Manuals