LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Steering >> Steering Columns >> Removal & Installation >> Steering Column R & I >> Installation (Tempo & Topaz)

Installation (Tempo & Topaz)

  1. Engage steering shaft to intermediate shaft and loosely tighten connecting clamp nut and bolt.
  2. Ensure 2 clips are present on outer tube. Raise column into position at column mounting bracket. Install nuts and bolts and tighten loosely.
  3. On vehicles with console shift, install interlock cable to column. Connect all steering column electrical connectors. Install upper shroud. Tighten steering column mounting nuts and bolts.
  4. On vehicles with air bag, unlock steering column using lock cylinder. Cycle steering wheel one turn to left and one turn to right to align intermediate shaft into steering shaft.
  5. Tighten connecting clamp nut to specification. See TORQUE SPECIFICATIONS  . Install lower shroud. Install cruise control module (if equipped). Install cover at knee level of instrument panel. Connect battery ground cable. Check AIR BAG light system for faults.
scientia non olet · About LEMON Manuals