LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Steering >> Steering Columns >> Removal & Installation >> Steering Column R & I >> Installation (Mustang)

Installation (Mustang)

  1. Insert steering column through hole in instrument panel. Align 4 bolts on brake pedal bracket with holes in column mounting bracket. Install nuts and tighten to 20-37 ft. lbs. (27-50 N.m).
  2. Connect all electrical connectors to column. Engage metal safety strap and bolt assembly to flange on steering gear input shaft. Tighten nuts to specification. DO NOT  overtighten nuts.
  3. Install dust boot to floor panel at steering column base. Install steering wheel. Install upper and lower shrouds. Install hood release mechanism and trim panel at knee level of instrument panel. Connect battery ground cable. Check AIR BAG light system for faults.
scientia non olet · About LEMON Manuals