LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disabling & Activating Air Bag System >> Complete System Reactivation

Complete System Reactivation

  1. Disconnect negative and positive battery cables. Remove air bag simulator from clockspring connector. Remove air bag simulator from passenger-side air bag vehicle harness connector (if equipped). Install driver-side and passenger-side (if equipped) air bag modules.
  2. Position driver-side air bag module onto steering wheel, and secure with 4 nut and washer assemblies. Tighten to specification. See TORQUE SPECIFICATIONS  table. Reconnect positive and negative battery cables. System is now reactivated. Perform system operation check to ensure SRS is functioning properly. See TESTING - SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals