LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (EGR Function Testing - Ford - Cars) >> EGR Function Testing - Ford - Cars >> Test 7 >> 1.8L & 2.5L (EEC Systems)

1.8L & 2.5L (EEC Systems)

WARNING: This page does not describe the selected car, but rather 532 other vehicles, including the 2018 Ford C-Max, 2017 Ford Fusion, 2017 Ford C-Max, 2016 Ford Fusion, and 2016 Ford C-Max. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect and plug vacuum line to EGR valve. Attach hand vacuum pump to EGR valve. Start engine. Warm to normal operating temperature.
  2. Allow engine to idle. Slowly apply vacuum to EGR valve. Engine should stumble or stall. If not, check for defective EGR valve, or blocked EGR passages.
scientia non olet · About LEMON Manuals