Shift Cable/Linkage: FLC
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1993 Mercury Tracer, 1993 Mercury Topaz, 1993 Mercury Sable, 1993 Mercury Grand Marquis, and 1993 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
Position shift level in Drive position. Loosen shift control cable retaining nut at transaxle. Ensure transaxle manual lever is in Drive position (second detent from rearmost position). Tighten retaining nut to 10-19 ft. lbs. (14-27 N.m). Check transaxle operation in all positions. Ensure neutral start switch and back-up lights operate.