LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Servicing - A/T) >> Adjustments >> Neutral Safety Switch >> 4EAT (Probe)

4EAT (Probe)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1993 Mercury Tracer, 1993 Mercury Topaz, 1993 Mercury Sable, 1993 Mercury Grand Marquis, and 1993 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove shift cable from manual shaft. Disconnect neutral safety switch connector. Rotate manual shaft to align with alignment mark on top of neutral safety switch.
  2. Loosen neutral safety switch mount bolts. Adjust neutral safety switch so that continuity is present between terminals "A" and "H", and between terminals "F" and "I". Install shift cable negative battery cable.
scientia non olet · About LEMON Manuals