Cylinder Block Specifications

WARNING: This page is about a different car, the 1992 Mercury Tracer, 1992 Ford Escort, 1991 Mercury Tracer, and 1991 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

Cylinder Bore

Standard Diameter

3.23 (82.0)

Maximum Taper

.010 (.25)

Maximum Out-Of-Round

.005 (.13)

Maximum Deck Warpage ⁽¹⁾

.003 (.08)

⁽¹⁾	DO NOT machine more than .010" (.25 mm) of material from original cylinder block head surface.