LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.6L V8 - VIN [W] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Disconnect negative battery cable. Release belt tensioner and remove accessory drive belt. Raise and support vehicle. Remove crankshaft damper retaining bolt and washer.
  2. Using Puller (T58P-6316-D), remove crankshaft damper. Using Seal Remover (T74P-6700-A), remove seal from front cover.
scientia non olet · About LEMON Manuals