Cylinder Block Specifications

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

Cylinder Bore

Standard Diameter ⁽¹⁾

Red

3.5512-3.5517 (90.200-90.213)

Blue

3.5517-3.5522 (90.213-90.226)

Yellow

3.5522-3.5527 (90.226-90.239)

Maximum Taper

.0002 (.005)

Maximum Out-Of-Round

.0008 (.020)

Maximum Deck Warpage

⁽²⁾*

⁽¹⁾	Diameter is determined by color code.

⁽²⁾	Cylinder block warpage is not available from manufacture. DO NOT machine more than .010" (.25 mm) from cylinder block original thickness.