LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft Alignment >> Checking Air Suspension >> Vehicle Trim Setting Procedure

Vehicle Trim Setting Procedure

  1. On models equipped with air suspension, if vehicle temperature differs more than 20°F from shop area, allow enough time for temperature of vehicle to adjust.
  2. Position vehicle on alignment rack and turn ignition off. Level alignment rack as necessary. Turn on ignition. DO NOT START  . After one minute, push trunk release.
  3. Turn ignition off, and exit vehicle. Allow vehicle 20 seconds to settle to trim height with doors closed, then turn air suspension switch off. Switch is located on left side of vehicle trunk.
scientia non olet · About LEMON Manuals