Front Vehicle Riding Height

Measure distance between lower ball joint and center line of lower control arm inner bushing. See Fig 1 . If dimension "C" is not a 1/4" (6 mm), loosen left and/or right lower arm stud. See Fig 2 .

Fig 1: Checking Air Suspension Front Riding Height
Courtesy of FORD MOTOR CO.

Fig 2: Adjusting Air Suspension Front Riding Height
Courtesy of FORD MOTOR CO.
Move front height sensor to obtain correct dimension. Three adjustment positions are provided. Moving one position will change the "C" dimension 1/2" (12 mm).