LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Front Wheel Bearings

Front Wheel Bearings

Front wheel bearings are a hub unit design and are prelubricated and sealed. Bearings do not require scheduled maintenance. Bearings are preset and cannot be adjusted. If bearing replacement is required for any service, hub and bearing must be replaced as an assembly. Bearings cannot be disassembled from hub and serviced separately. Hub nut torque is 188-254 ft. lbs. (255-345 N.m).

NOTE: DO NOT back off nut after reaching required torque. Replace nut if backed off or removed.
WARNING: DO NOT use impact tools to tighten hub nut. Bearing damage will result.
scientia non olet · About LEMON Manuals