LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Removal & Installation >> Steering Wheel >> Removal

Steering Wheel: Removal

  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS  . Disable SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Center front wheels to straight-ahead position. Remove driver-side air bag module from steering wheel. See DRIVER-SIDE AIR BAG MODULE  . Disconnect speed control wiring harness connector from steering wheel.
  3. Remove steering wheel retaining bolt. Reference mark steering wheel hub to steering wheel shaft to ensure proper alignment during installation. Using Steering Wheel Puller (T67L-3600-A), remove steering wheel. Route clockspring wiring harness through steering wheel as wheel is lifted off shaft.
scientia non olet · About LEMON Manuals