Camshaft Specifications
CAMSHAFT SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Camshaft Bearing Bore | 2.0094-2.0104 (51.039-51.-064) | |||
| Cylinder Block Bearing Bore | ||||
| Bores No. 1 & 4 | 2.1531-2.1541 (54.688-54.714) | |||
| Bores No. 2 & 3 | 2.1334-2.1344 (54.188-54.214) | |||
| End Play | .001-.005 (.03-.13) | |||
| Journal Diameter | 2.0074-2.0084 (50.988-51.013) | |||
| Journal Runout | .005 (.127) | |||
| Lobe Lift | (1) 1.26 (6.60) | |||
| Oil Clearance | .001-.003 (.03-.08) | |||
|
||||