LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Lateral Link, Trailing Arm & Rear CROSSMEMBER >> Removal

Lateral Link, Trailing Arm & Rear CROSSMEMBER: Removal

  1. Remove spindle. See REAR SPINDLE  . Remove rear stabilizer bar. See REAR STABILIZER BAR  .
  2. Remove nut from common lateral link mounting bolt at rear crossmember. Remove rear lateral link.
    NOTE: Because of close clearance between fuel tank and lateral link mounting bolt, the front lateral link and bolt must be removed with the crossmember.
  3. Remove parking brake attaching bolt from trailing arm assembly. Remove trailing arm mounting bolt from body mounting bracket. Remove trailing arm.
  4. Remove exhaust system mounting bolts and brake line retaining bracket from crossmember. Remove mounting bolts from end of crossmember. Remove crossmember and front lateral link together.
  5. Remove common lateral link mounting bolt from crossmember and separate. Remove front lateral link from crossmember. See Figure .
scientia non olet · About LEMON Manuals