LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.0L V6 - VIN [U] >> Removal & Installation >> Oil Pan >> Removal (Sable & Taurus)

Removal (Sable & Taurus)

  1. Disconnect negative battery cable. Remove dipstick. Raise and support vehicle. Drain engine oil. Remove starter and brace.
  2. Disconnect low oil level sensor connector at oil pan (if equipped). Disconnect oxygen sensor. Remove exhaust pipe located below oil pan. Remove flywheel cover. Remove retaining bolts, oil pan and gasket.
scientia non olet · About LEMON Manuals