LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.0L V6 - VIN [U] >> Removal & Installation >> Front Cover Oil Seal >> Removal (Sable & Taurus)

Removal (Sable & Taurus)

  1. Disconnect negative battery cable. Remove accessory drive belts. Raise and support vehicle. Remove right front wheel.
  2. Remove retaining bolts and crankshaft pulley. Remove crankshaft damper retaining bolt. Using Crankshaft Damper Remover (T58P-6316-D) and Adapter (T28L-6316-B), remove crankshaft damper. Pry seal from front cover, using care not to damage sealing surfaces.
scientia non olet · About LEMON Manuals