LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.0L V6 - VIN [U] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold. See INTAKE MANIFOLD . Remove exhaust manifold. See EXHAUST MANIFOLD . Disconnect necessary electrical connections.
  2. On left cylinder head, remove accessory drive belt and automatic tensioner. Remove power steering pump and bracket with hoses attached and secure aside.
  3. On both cylinder heads, remove valve covers. Loosen rocker arm bolts. Pivot rocker arms from push rods. Remove push rods. Mark component location for reassembly reference. Evenly remove cylinder head bolts and discard. Remove cylinder head and gasket.
scientia non olet · About LEMON Manuals