LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel >> Removal & Installation

Removal & Installation

  1. Remove 2 horn pad attaching screws from back side of steering wheel. Remove horn pad. Remove steering wheel nut.
  2. Punch aligning marks on steering wheel and steering shaft. Use appropriate puller to remove steering wheel. To install, reverse removal procedure. Tighten steering wheel nut to 29-36 ft. lbs. (39-49 N.m).
scientia non olet · About LEMON Manuals