LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> Testing >> Seat Belt Warning Light Testing >> Seat Belt Warning Light Switch Check

Seat Belt Warning Light Switch Check

  1. Disconnect 4-pin seat belt buckle switch. Seat belt buckle switch 4-pin connector is located inside right door panel.
  2. If seat belt warning light goes off, replace seat belt buckle switch. If seat belt warning light stays on, repair Brown/White terminal wire between seat belt buckle switch and CPU. See IDENTIFYING SEAT BELT WARNING SWITCH CONNECTOR illustration.
Fig 1: Identifying Seat Belt Warning Switch Connector
G108937Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals