LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> Testing >> Seat Belt Warning Light Testing >> Seat Belt Warning Light Inoperative

Seat Belt Warning Light Inoperative

  1. Disconnect CPU connector. CPU 14-pin connector is located above fuse panel, near left kick panel. Ground pin "E" at CPU connector. See IDENTIFYING CPU 14-PIN CONNECTOR illustration.
  2. If seat belt warning light does not come on, go to SEAT BELT WARNING LIGHT SIGNAL CHECK. If seat belt warning light comes on, go to SEAT BELT WARNING LIGHT CPU CHECK.
scientia non olet · About LEMON Manuals