LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> Testing >> Seat Belt Warning Light Testing >> Seat Belt Warning Light CPU Check

Seat Belt Warning Light CPU Check

  1. Connect jumper wire between pins "E" and "M" at CPU 14-pin connector. See IDENTIFYING CPU 14-PIN CONNECTOR illustration. CPU 14-pin connector is located above fuse panel, near left kick panel.
  2. If seat belt warning light comes on, replace CPU. If seat belt warning light does not come on, go to SEAT BELT WARNING LIGHT GROUND CHECK NO. 1.
scientia non olet · About LEMON Manuals