LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> Testing >> Brake Warning Light Testing >> Brake Warning Light Continuity Check No. 3

Brake Warning Light Continuity Check No. 3

  1. Ground Red wire at brake fluid level warning light switch 2-pin connector. See IDENTIFYING BRAKE FLUID LEVEL SENSOR CONNECTOR illustration. Brake fluid level warning light switch is a 2-pin wire connector located at brake fluid level sensor, under brake fluid reservoir.
  2. If brake warning light comes on, replace brake fluid level warning light switch. If brake warning light does not come on, repair Red wire between instrument panel and brake fluid level warning light switch.
scientia non olet · About LEMON Manuals