LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Fuel Gauge Continuity Check No. 1

Fuel Gauge Continuity Check No. 1

  1. Ground Yellow wire at fuel tank sending unit 6-pin connector. See IDENTIFYING FUEL TANK SENDING UNIT 6-PIN CONNECTOR illustration. Fuel tank sending unit 6-pin connector is located on front of fuel tank.
  2. Observe fuel gauge reading. If fuel gauge reads full, go to FUEL GAUGE CONTINUITY CHECK NO. 2. If fuel gauge does not read full, repair Yellow wire between gauges and fuel tank sending unit.
Fig 1: Identifying Fuel Tank Sending Unit 6-Pin Connector
G90I08302Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals