LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Removal & Installation >> Turn Signal Switch

Turn Signal Switch

  1. Disconnect negative battery cable. Remove steering wheel. Remove instrument panel. See INSTRUMENT PANEL R & I.
  2. Remove attaching screw from turn signal arm, and remove arm. Remove 2 attaching screws from turn signal switch. Remove turn signal switch from back of instrument panel. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals