Radiator Cooling Fan Motor: Service and Repair

Fig. 41 Cooling Fan Motor Replacement:

Fig. 42 Cooling Fan Motor Replacement:

Refer to Fig. 25, for models with 2.5L/4-153 and 3.0L/V6-183 engines and Fig. 26, for models with 3.0L/V6-183 SHO and 3.8L/V6-232 engines.
1. Disconnect battery ground cable, then remove radiator sight shield.
2. Disconnect fan motor wiring connector.
3. Remove bolts attaching fan and shroud assembly to radiator.
4. On models with 2.5L/4-153 and 3.0L/V6-183 engines, rotate fan and shroud assembly, then lift past radiator.
5. Remove fan U-spring retainer from motor shaft, then the fan.
6. Remove fan motor to shroud bolts, then remove motor.
7. On models with 3.8L/V6-232 engines, slide cooling fan module clear of radiator hose connector, then lift past radiator.
8. Reverse procedure to install.