Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Rear Disc Brakes		1.8		B
All,Rear Drum Brakes		2.2		B
Front		1.0		B
Rear,Disc Brakes		1.0		B
Rear,Drum Brakes		1.4		B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional	Includes: Bleed Brakes.	0.2		B
One,w/ABS	Includes: Bleed Brakes.	0.8		B
One,w/o ABS	Includes: Bleed Brakes.	0.4		B
Combination Procedure: CALIPER: Overhaul:
One,w/ABS	Includes: Bleed Brakes.	1.0		B
One,w/o ABS	Includes: Bleed Brakes.	0.6		B
Combination Procedure: CALIPER: Replace:
One,w/ABS	Includes: Bleed Brakes.	0.7		B
One,w/o ABS	Includes: Bleed Brakes.	0.3		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: NOTE: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation.
Each,Front		0.4		B
Each,Rear	Includes: Repack Wheel Bearings.	0.2		B
Combination Procedure: DISC ROTOR: Replace:
Each		0.1		B
Combination Procedure: DRUM: Replace:
Each		0.1		B
Combination Procedure: WHEEL BEARING: Replace:
Front	Refer to Front Wheel Bearing - R&R.			B
Rear,One Side		0.3		B
Combination Procedure: WHEEL CYLINDER: Overhaul:
One,Off Vehicle	Includes: Bleed Brakes.	0.5		B
One,On Vehicle	Includes: Bleed Brakes.	0.3		B
Combination Procedure: WHEEL CYLINDER: Replace:
One	Includes: Bleed Brakes.	0.3		B
Combination Procedure: WHEEL HUB: Replace:
Front		0.3		B
Rear,One Side		0.3		B