LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe LX, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Electronic >> Testing >> Seat Belt Warning Light Short Check 2

Seat Belt Warning Light Short Check 2

  1. Place jumper wire between Brown/Black and Brown/White wires at CPU 14-pin connector. See Figure . If seat belt warning light goes off, replace CPU.
  2. If seat belt warning light does not go off, proceed to SEAT BELT WARNING LIGHT SWITCH CHECK  .
scientia non olet · About LEMON Manuals