LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe LX, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Electronic >> Testing >> Seat Belt Warning Light CPU Check

Seat Belt Warning Light CPU Check

  1. Place jumper wire from Brown/Black to Brown/White wires at CPU 14-pin connector. See Figure . CPU 14-pin connector is located at joint box, above fuse panel near left driver kick panel.
  2. If seat belt warning light comes on, replace CPU. If seat belt warning light does not come on, proceed to the SEAT BELT WARNING LIGHT GROUND CHECK 1  .
scientia non olet · About LEMON Manuals