LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe LX, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Electronic >> Testing >> Instrument Cluster Supply Check

Instrument Cluster Supply Check

  1. Check for 11-13 volts on Black/Yellow wire at instrument cluster 18-pin connector. Instrument cluster 18-pin connector is located on right side of dash, near steering column.
  2. Observe voltmeter reading. If voltmeter reads 11-13 volts, go to INSTRUMENT CLUSTER GROUND CHECK 1  . If voltmeter does not read 11-13 volts, repair Black/Yellow wire between gauges and fuse panel.
scientia non olet · About LEMON Manuals