LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe LX, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Fuel Gauge Continuity Check 2

Fuel Gauge Continuity Check 2

  1. Ground Black/Light Green wire. See Figure . Fuel tank sending unit 6-pin connector is located on front of fuel tank.
  2. Observe fuel gauge reading. If fuel gauge reads correctly, repair Black/Light Green wire between fuel tank sending unit and ground. If fuel gauge does not read correctly, ground Blue/Light Green wire at harness connector. If fuel gauge reads correctly, repair Blue/Light Green wire between harness connector and instrument panel. If gauge reads incorrectly, replace fuel tank sending unit.
scientia non olet · About LEMON Manuals