LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Oil Pan >> Removal

Oil Pan: Removal

  1. Disconnect negative battery cable. Raise and support vehicle. Remove right splash shield at front fender wheel opening. Drain engine oil. Remove engine-to-flywheel housing support bracket.
  2. Remove front section of exhaust pipe. Remove exhaust pipe support bracket. Remove flywheel housing dust cover bolts and cover. Remove oil pan bolts and pull down oil pan for access to oil pump. Remove oil pump pick-up tube and oil pan insert (stiffener). Remove oil pan.
scientia non olet · About LEMON Manuals