LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Oil Pan >> Installation

Oil Pan: Installation

  1. Clean all mounting surfaces. Apply a continuous bead of silicone sealer to both sides of the oil pan stiffener, along inside edge of bolt holes. Install oil pick-up tube with new gasket. Install stiffener and oil pan.
  2. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at end of article. To complete installation, reverse removal procedure. Fill crankcase with oil. Start engine and check for leaks.
scientia non olet · About LEMON Manuals