LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Intake Manifold >> Installation

Intake Manifold: Installation

Clean gasket surfaces. Position new gasket on studs. To complete installation, reverse removal procedure. Ensure control cables are properly adjusted.

Fig 1: Exploded View of Intake Manifold Components
G106518Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals